|
Trend 3/83DX1/2TC 1/2" Shank Double-Flute Straight Kitchen Worktop Cutter 12.7mm x 50mm
2-Flute TCT cutter. Ideal for kitchen worktop cutting and essential for routing post formed joints with worktop jigs in tops up to 40mm thick. Especially suited for use on abrasive chipboard core laminate-faced worktops but also suitable for materials... |
£46.99 More Information |
|
Trend ALU/01X1/4TC 1/4" Shank Double-Flute V-Groove Router Cutter 13mm x 10mm
Professional, V-groove cutter designed for working with specialist composite cladding such as Alucobond and Dibond. Cuts a V-groove through the back face and inner insulation core for clean folds when cladding columns or turning corners. Leaves a 3mm... |
£55.99 More Information |
|
Trend 46/91X1/4TC 1/4" Shank Double-Flute Straight Router Cutter 12.7mm x 9.5mm
Professional, high-quality, 2-flute TCT bearing-guided cutter with shank-mounted bearing guide. Suitable for softwood, hardwood, plywood and wood-based panels. Extra-hard tips for a sharp finish and long life. Ideal for profiling against a template and... |
£39.99 More Information |
|
Trend 47/40X1/2TC 1/2" Shank Double-Flute Straight Router Cutter 12.7mm x 30mm
Professional, high quality, 2-flute TCT router cutter for clean cutting edges and fast clearance of waste in all timber and timber-based materials. Ideal for flush, clean cutting apertures in worktops. Extra-hard tips for a sharp finish and long life.... |
£54.99 More Information |
|
Trend 3/20X1/4TC 1/4" Shank Double-Flute Straight Router Cutter 6.3mm x 16mm
Professional, high-quality, 2-flute TCT straight cutter for clean edges and fast clearance of waste in all timber and timber-based materials. Extra-hard tips for a sharp finish and long life. Bottom-cut feature for general purpose slotting, grooving and... |
£29.49 More Information |
|
Trend 4/6X1/4TC 1/4" Shank Double-Flute Straight Router Cutter 20mm x 25mm
Professional, high-quality, 2-flute TCT straight cutter for clean edges and fast clearance of waste in all timber and timber-based materials. Extra-hard tips for a sharp finish and long life. Bottom-cut feature for general purpose slotting, grooving and... |
£39.99 More Information |
|
Trend T46/01X1/4TC 1/4" Shank Double-Flute Straight Router Cutter 12.7mm x 25mm
Professional, high quality, bearing-guided cutter. Ideal for bringing decorative laminates and veneers flush to an edge or for templating work. 2-flute TCT for clean cutting edges and fast clearance of waste. Recommended for use with hand-held and table... |
£29.99 More Information |
|
Trend T46/0X1/4TC 1/4" Shank Double-Flute Straight Router Cutter 9.5mm x 12.7mm
Professional, high-quality, 2-flute TCT bearing-guided cutter. Suitable for laminate and template work and for bringing decorative laminates and veneers flush to an edge. Also appropriate for softwood, hardwood, plywood and wood-based panels. Recommended... |
£23.99 More Information |
|
Trend 3/10X1/4TC 1/4" Shank Double-Flute Straight Router Cutter 3.2mm x 11mm
Professional, high-quality, 2-flute TCT bearing-guided cutter. Ideal for clean cutting edges and fast clearance of waste in all timber and timber-based materials. Extra-hard tips for a sharp finish and long life. Bottom-cut feature for general purpose... |
£21.99 More Information |
|
Trend 3/61X1/4TC 1/4" Shank Double-Flute Straight Router Cutter 10mm x 25mm
Professional, high-quality, 2-flute TCT straight cutter for clean edges and fast clearance of waste in all timber and timber-based materials. Extra-hard tips for a sharp finish and long life. Bottom-cut feature for general purpose slotting, grooving and... |
£28.99 More Information |
