|
Obart Select Obart FL-550A Adblue Pump (110V)
Surface mounted pump for pumping Adblue and water. It is self-priming, can draw liquids up 3 metres and has an integral by-pass valve to enable it to operate against a closed nozzle, or valve, for up to 3 minutes. Motor is IP55, continuously rated, has... |
£204.00 More Information |
|
Obart Select Obart Adblue Discharge Delivery Hose
Delivery/discharge hose to suit FL-5 series pumps for use with Adblue and is in black rubber, reinforced with steel yarn. 20mm diameter, 4 metres long with 1” MBSP hose connections. |
£44.98 More Information |
|
Obart Select Obart SAM 316-80/S 316 Stainless Steel Automatic Seawater & Chemical Pump (230V)
The SAM 316-80/S submersible pump is for pumping seawater, saltwater and chemicals. Constructed in 316 grade cast and pressed stainless steel, it has a pendant type float switch for automatic level control. It also comes fitted with wear resistant double... |
£1109.00 More Information |
|
Obart Select Obart SA 316-80 316 Stainless Steel Manual Seawater & Chemical Pump (400V)
The SA 316-80 submersible pump is for pumping seawater, saltwater and chemicals. Constructed in 316 grade cast and pressed stainless steel it is fitted with wear resistant double mechanical seals in silicon carbide, carbon ceramic and Viton. The product... |
£1099.00 More Information |
|
Obart Select Obart SAM 316-130/S 316 Stainless Steel Automatic Seawater & Chemical Pump (230V)
The SAM 316-130/S submersible pump is for pumping seawater, saltwater and chemicals. Constructed in 316 grade cast and pressed stainless steel, it has a pendant type float switch for automatic level control. Fitted with wear resistant double mechanical... |
£1299.00 More Information |
|
Obart Select Obart SA 316-130 316 Stainless Steel Manual Seawater & Chemical Pump (400V)
The SA 316-130 submersible pump is for pumping seawater, saltwater and chemicals. Constructed in 316 grade cast and pressed stainless steel it is fitted with wear resistant double mechanical seals in silicon carbide, carbon ceramic and Viton. Supplied... |
£1249.00 More Information |
|
Obart Select Obart Adblue Inlet Suction Hose
Inlest/suction hose to suit FL-5 series pumps for use with Adblue and is in clear PVC, reinforced with steel yarn. 25mm diameter, 2 metres long with a footvalve and 1” MBSP hose connections. |
£32.98 More Information |
|
Obart Select Obart KS1100/PA Seawater Surface Pump (230V)
The KS1100/PA surface mounted, self-priming “jet” pump is for pumping sea-water. The threaded inlet, outlet and shaft are in 316 stainless steel, with a silicon carbide and viton mechanical seal, a pump body in polypropylene, with the impeller... |
£299.00 More Information |
|
Obart Select Obart FL-540 Adblue Pump (24V)
A surface mounted pump for pumping Adblue and water. It is self-priming, can draw liquids up 3 metres and has an integral by-pass valve to enable it to operate against a closed nozzle, or valve, up to 3 minutes. The DC motor is IP55, with a 20 minute... |
£204.00 More Information |
|
Obart Select Obart FL-550 Adblue Pumping Kit (110V)
This Adblue pumping kit has a powerful 110v pump, surface mounted pump, 4 metres of rubber and steel reinforced delivery hose, 2 metres of PVC and steel reinforced inlet hose and a manual cut-off aluminium nozzle. It is self-priming, can draw liquids... |
£249.00 More Information |
