Provides high resistance to abrasion and impact making them ideal for hardfacing of wearing parts on agricultural ploughs, scraper blades, digger buckets etc. Also provides good resistance to heat.

Startium330 is a compact, micro-processor controlled SMART starter/SMART charger suitable for professional use. Modern vehicles require protection for on-board electronics whilst being jump started, Startium has protections built in against polairty reversal,...

Complete set of consumables for the torch supplied with GYS plasmacutter models 31FV and 40FV. Contains 1x nozzle, 1x diffuser, 3x tips & 3x electrodes

Filler wire for welding Cu-Si alloys to Cu-Mn or with mild steel. Commonly used in the automotive car body repair industry for MIG brazing of galvanised or zinc coated steels (HSS steels, High carbon steels). Can also be used for the welding of copper...

The extraction unit has an extraction capapcity of 150m³/hour, is light and compact weighing only 15kg. Works in sync worth the torch trigger.

EASYLINER is a complete dent pulling kit, essential for repairing small, medium & large dents in body panels, sills, wheel arches etc. Thanks to Easyliner, you can repair panels rather than replace and remove dents without disassembly, reducing downtime...

Aluminium TIG filler rods containing 5% magnesium providing excellent corrosion resistance and high tensile strength (250Mpa). Suitable for welding a wide range of aluminium magnesium alloys e.g. 5251 (N4), 5154 (N5), 5454 (N51) and heat treatable alloys...

TIG filler rods - copper coated, designed for porosity free welding of mild non-alloy steels. Suitable for the execution of root passes when controlled penetration is required and is suitable for use on steel tanks and pipe work.

308L Stainless steel TIG filler rods for welding austenitic stainless steels molybdenum-free (304, 304L, 321, 347). Provides excellent corrosion and wear resistance.

Aluminium TIG filler rods containing 5% magnesium providing excellent corrosion resistance and high tensile strength (250Mpa). Suitable for welding a wide range of aluminium magnesium alloys e.g. 5251 (N4), 5154 (N5), 5454 (N51) and heat treatable alloys...