IP66 metal enclosed disconnect switch. Fully rated AC22 for distribution loads. With bottom-mounted gland plate, disconnectable neutral link and easy to wire terminals. 220 - 415V Without Knockouts Large Capacity Easy to Wire Terminals Suitable for M10...

4-Pole 125A DIN rail mounted isolator switch for use with Defender TP distribution boards. AC-22A DIN Rail Mounted Fitting

All-metal enclosure consumer unit with 100A mains switch. Includes floating busbar and cable entry points on the top, bottom, left, right and rear. 18th Edition Amendment 2. 100A Mains Switch Floating Busbar DIN Rail Supplied Top, Bottom, Left, Right...

Designed to protect against overload and short circuit. For use in Defender consumer units and distribution boards. DIN rail mounted. DIN Rail Mounted Fitting Type B Curve

Designed to protect against overload and short circuit. For use in Defender consumer units and distribution boards. DIN rail mounted. DIN Rail Mounted Fitting Type B Curve

Fabricated from steel with bottom-mounted gland plate and disconnectable neutral link. Fully rated AC22 for distribution loads. Easy to wire terminals. 220 - 415V Without Knockouts Large Capacity Easy to Wire Terminals Suitable for 16mm² Cable Lockable

Designed to protect against overload and short circuit. DIN rail mounted. For use in Defender consumer units and distribution boards. DIN Rail Mounted Fitting Type B Curve

DIN rail mounted. Designed for use in Defender consumer units.

DIN rail mounted. Designed for use in Defender distribution boards.

18th Edition Amendment 2. Dual RCD consumer unit with 100A mains switch and floating busbar. DIN rail supplied. 100A Mains Switch 2 x Type A 80A 30mA RCDs 6 x Type B MCBs (2 x 6A, 1 x 16A, 2 x 32A & 1 x 40A) 0 Blanks Floating Busbar DIN Rail Supplied...